86-538-8660007
Youth Development Business Area, Tai'an, Shandong, China (Mainland)
GCL4600 6000g m2 Geosynthetic Clay linear Bentonite Geosynthetic Clay Liner China factory
1.Product Description
Geosynthetic clay liners (GCLs) are high performance needle punched environmental reinforced composites which combine two durable geotextile outer layers with a uniform core of natural sodium bentonite clay to form a hydraulic barrier. Fibers from the non-woven geotextile are needle punched through the layer of bentonite and incorporated into the other geotextile (either a woven or non-woven).when hydrated under a confining load, the bentonite swells to form a low permeability clay layer with the equivalent hydraulic protection of several feet of compacted clay.
Jingwei® Technical Parameter
| Property | National standard | Enterprise Standard | Inspection standards |
| JG/T 193-2006 | |||
| Geosynthetic Clay Expansionindex | ≥24 ml/2g | ≥25ml/2g | ASTM D5890 |
| Mass Per Unit Area(g/m2) | ≥4800 g/m2 | ≥4800 gm2 | ASTM D5993 |
| Tensile Strength | ≥6KN/m | ≥8KN/m | ASTM 4632 |
| Maximum load elongation | ≥10% | ≥10% | ASTM 4632 |
| Permeability | ≤5×10-9 | ≤5×10-9 | ASTM D5084 |
| Moisture content | ≤15% | ≤15% | ASTM D4643 |
| Peel strength | ≥40N | ≥65N | ASTM D4632 |
| Hydrostatic pressure | 0.4Mp | 0.4~0.6Mp | ASTM D5891 |
Features :
1.The permanent waterproof
Because sodium base bentonite is a natural inorganic material, even after a long time or the surrounding environment changes,
also won't happen aging or corrosion phenomena, so the waterproof performance persistence.
2. Compactibility
Sodium base bentonite under water pressure condition to form diaphragm with high density, thickness of about 3 mm,
its permeability is 5 x 10-11m/SEC below, equivalent to 100 times the compactness of 30 cm thickness of clay,
have very strong since the water retention performance.
3.Not affected by temperature
In cold climates will not brittle fracture.
4.Environmental protection
Bentonite as natural inorganic material, non-toxic harmless to human body, no special effects to the environment,
have good environmental performance.
5.Simple and short time of construction
Compared to other waterproofing materials, construction is relatively simple, don't need to be heated and paste.
With bentonite powder and nails, washers, etc are connected and fixed. After construction does not need special
inspection, if it is found that the waterproof defects and easy to maintenance.
GCL is existing waterproof material in construction period of the shortest.
Product Display
2.Packaging & Shipping
Packaging: Woven bag or As required
Shipping: Generally within 7 days for a 40ft container
3.Company Information
Taian Jingwei Geosynthetics is a professional manufacturer and supplier of geosynthetics in cluding geomembran,geotextile,geocell,geogrid,drainage net,erosion protection mat in china.
Our company was founded in 2004,Relying on years of accumulated and experience,we provide marvelous engineering materials and perfect during these years,our products have exported to dozens of countries,such as Indonesia,Australia,Poland,France,Tanzania,Etc and Praised highly by them.
Quality and innovation are always what we care the most,So we have built long-term and close cooperation with technique design departments and colleges.
4.Our Services
1.Reply your inquiry in 24 working hours.
2.Experienced staffs answer all your questions in fluent English
3.Special discount and protection of sales are provided to our distributor.
4.Sample:we can send out sample for test in one week if the order quantity is big enough. But the shipment charges is usually paid by your side,the charges will be rebounded when we haveformal order.
5.Professional factory: We are manufacturer,specializing in producing all kinds of geogrids for more than 10 years, competitive with good quantity.
6.As an honest seller, we always use superior raw material, advanced machines,skilled technicians to ensure our products to be finished in high quality and stable feature.
5.Contact Us
